It has taken a year and a week, but I finally have the RACHEL box from Tanzania and I have used Method 3 to recover the old 2015 box into a system with zero modules. Just like before, and I thought everything was going okay.
Unfortunately, in the module interface, all of the rsync commands are trying to find content at a non-existent IP address … how can I configure the update to rsync with the WorldPossible server?
This is an example of what I’m seeing in the Install tab:
command: rsync -Pav rsync://192.168.1.10/rachelmods/en-kalite /media/RACHEL/rachel/modules/
runtime: 17:49 failed
files_done: 0 out of 55762 ( 0% )
data_done: 0 out of 42210768 ( 0% )
rsync: failed to connect to 192.168.1.10 (192.168.1.10): Connection timed out (110)
rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9]
So what I need to configure is a proper address for WorldPossible instead of 192.168.1.10.
Where do I do that and which IP address do I use?
Sadly, I’m constrained by time, because the box is going back to TZ in three days!
Thanks for your guidance!
. . . . . . Ken