Download the latest image file. https://drive.google.com/open?id=0B9Jp-e9hIqz3QndPMHRsY0FLUUE
Burn the image file to a 16GB or larger USB flash drive using free 'imageUSB' software.
Edit a file named 'update.sh' on the newly burned flash drive. On ~line 38, change the METHOD variable from 1 to 3. Be sure to save.
Plug the USB drive into the back of the Intel CAP and power on.
Imaging process should begin and take about 8 minutes. Confirm the little blue light stays lite during the process. Slow flashing of the 3 waving lights.
It will be blank and the 3 waves will be solid once complete.
Power off the unit by holding the button for 3 seconds, remove the USB, add Internet connectivity, and turn the device back on.
Find the IP Address of your CAP to SSH into the device. Default username / password (root / 123lkj):
Install the screen software package:
Create screen permissions (see a video of screen):
Copy and paste the entire the following command:
wget https://raw.githubusercontent.com/rachelproject/rachelplus/master/cap-rachel-configure.sh \
-O /root/cap-rachel-configure.sh; chmod +x /root/cap-rachel-configure.sh; /root/cap-rachel-configure.sh -b full
Wait...wait..wait... A device could take a few days to create. It's about 400GB of content in millions of files